Troubleshooting Archives - Siglent Website - 深圳市鼎阳科技股份有限公司 //m.tapprz.com/na/category/service-support/common-problems/troubleshooting/ Sun, 04 Jan 2026 10:04:08 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 //m.tapprz.com/wp-content/uploads/2025/02/cropped-512X512-1-32x32.png Troubleshooting Archives - Siglent Website - 深圳市鼎阳科技股份有限公司 //m.tapprz.com/na/category/service-support/common-problems/troubleshooting/ 32 32 Measuring small signal waveform is disturbed too much. //m.tapprz.com/na/measuring-small-signal-waveform-is-disturbed-too-much/ Wed, 15 Jan 2025 01:22:39 +0000 //m.tapprz.com/measuring-small-signal-waveform-is-disturbed-too-much/ 1. The SDS1000 series of SIGLENT can detect millivolt signals at the minimum, and automatically turn on the bandwidth limiting function at the lowest 2mV/div gear to effectively filter out high-frequency clutter. 2. Connect the clamp to the reference ground of the signal, which can effectively reduce the waveform display distortion caused by the potential […]

The post Measuring small signal waveform is disturbed too much. appeared first on Siglent Website.

]]> 1. The SDS1000 series of SIGLENT can detect millivolt signals at the minimum, and automatically turn on the bandwidth limiting function at the lowest 2mV/div gear to effectively filter out high-frequency clutter.
2. Connect the clamp to the reference ground of the signal, which can effectively reduce the waveform display distortion caused by the potential difference between the oscilloscope and the measured signal due to the reference ground.
3. The SDS1000 series of SIGLENT can detect millivolt signals at the minimum, and automatically turn on the bandwidth limiting function at the lowest 2mV/div gear to effectively filter out high-frequency clutter.
.

The post Measuring small signal waveform is disturbed too much. appeared first on Siglent Website.

]]>